Technical Data Sheet B-632
Brady B-632 is a polyvinylfluoride film with a matte white printable topcoat and a permanent acrylic pressure sensitive adhesive.
Brady B-632 is recommended for wire identification and label applications where self-extinguishing properties are required. Brady Series 2000 and 5000 ribbons are recommended for dot matrix printing of B-632.
Brady B-632 has good smudge resistance, solvent resistance, and elevated temperature performance. B-632 is a thin tape with excellent flexibility for wrapping on small diameter wires.
Dot matrix printable or write-on aluminum foil label. B-184 can also be used as a wiremarker because of it's excellent conformability around wire.
RECOMMENDED RIBBONS
Brady Series
Brady Series
REGULATORY APPROVALS
Brady B-184 is RoHS compliant to 2005/618/EC MCV amendment to RoHS DIrective 2002/95/EC.
SPECIAL FEATURES
The aluminum foil used in B-184 is conductive. B-184 has excellent "memory" when wrapped on a wire, and may remain wrapped around a wire or cable even if the adhesive fails.
Temporary or general purpose labeling and wire identification where resistance to extremely harsh environments is not required
RECOMMENDED RIBBONS
Brady Series R2000
Brady Series R5000
REGULATORY APPROVAL
Brady B-110 is RoHS compliant to 2005/618/EC MCV amendment to RoHS Directive 2002/95/EC.
SPECIAL FEATURES
B-110, because it is a latex saturated paper stock, offers better flexibility and moisture resistance than standard paper labels as well as one piece removability from many surfaces.
GENERAL Print Technology: Thermal Transfer Material Type: Coated Vinyl Cloth Finish: Semi-Gloss White, Yellow and Orange Adhesive: Repositionable Rubber Based
APPLICATIONS
Wire, cable, and general identification numbers, letters and conduit and voltage markers
RECOMMENDED RIBBONS WHITE - MATERIAL
Brady Series R6200 (Brady Series R4300 and R6000 ribbons also acceptable)
REGULATORY/AGENCY APPROVALS
UL: B-498 is a UL Recognized Component to UL969 Labeling and Marking Standard when printed with Brady Series R6200 ribbon. See UL file MH17154 for specific details. UL information can be accessed online at UL.com. Search in Certifications area.
Brady B-498 is RoHS compliant to 2005/618/EC MCV amendment to RoHS Directive 2002/95/EC.
SPECIAL FEATURES
B-498 has a specially formulated top coat for very good thermal transfer print quality. The adhesive and cloth backing give excellent holding power, yet allow for clean removal and repositioning.