ASME (ANSI) Standard A13.1-2007
The ASME (ANSI) Standard for pipe identification is a widely used guideline in determining pipe identification requirements. The purpose of the standard is to "assist in identification of hazardous materials conveyed in piping systems and their hazards when released into the environment." "Pipes are defined as conduits for the transport of gases, liquids, semi-liquids or fine particulate dust."
Brady Pipe Marking Systems Meet the ASME (ANSI) A13.1-2007 Standard
The Brady Pipe Marking System instantly tells you all you need to know: pipe contents, direction of flow, whether hazardous or safe.
Brady Pipe Marking Systems Meet the ASME (ANSI) Size Recommendations
The A13.1-2007 standard also makes recommendations as to the size of letter height and length of color field for various pipe diameters. These recommendations are shown in the table.
Brady Pipe Marking Systems Meet ASME (ANSI) Color Recommendations
Unmarked pipes mean danger - to both life and property. Numerous injuries have occurred through ignorance of pipe contents, particularly when outside agencies are called in under emergency conditions. |
NOTE: For pipes less than 3/4" in diameter, a permanently legible tag is recommended.
|
Brady Pipe Marking Systems Meet the ASME (ANSI) A13.1-2007 Visibility Standard "Markers shall be located so that they are readily visible to plant personnel from the point of normal approach." Brady Pipe Markers instantly tell you all you need to know about pipe contents, direction of flow and whether hazardous or safe. |
|
Brady offers a full range of services—whether your job is large or small, we can help you with:
Estimating Services
Based on your up-to-date blueprints or drawings, we will provide you with a list of systems to be identified, quantity of markers required and total material cost.
Free Takeoff Service
Based on a drawing takeoff or plant walk-through, Brady can function independently or serve as an extension of your operations. Simply provide us with a copy of the plan view drawings, the pipe identification specifications and the insulation schedule. You will receive a comprehensive list of identification products and materials needed.
Turnkey Services
From engineering to installation, responsibility for getting your marking job done right rests with Brady. Use of high-quality materials provided by Brady, selected and installed by marking professionals in accordance with your specifications, assures you of a complete, reliable, cost-effective identification system.
|
 |
 |
|
|
|