• Print Page

    • Technical Data Sheets

     

    Search Technical Data Sheets



    Technical Data Sheet

    BRADY B-101 POLYCOATED TAGSTOCK

    TDS No. B-101
    Effective Date: 11-Mar-1999

    Description:
    Brady B-101 is a surface printed polycoated tagstock.


    Details:


    Use:
    Brady B-101 is used for temporary vehicle placards.

    Special Properties:
    Brady B-101 polycoated tagstock exceeds D.O.T. 30 day weathering requirements.

    Substrate Type:
    Polycoated tagstock

    Standard Material Color:
    White

    Standard Legend Colors:
    Black, red, green, blue, yellow, and orange

    Thickness (ASTM D 1593):
    0.010 in. (0.25 mm)

    Abrasion Resistance (Method 5306 of U.S. Federal Test Method Std. No. 191A):
    CS-10 wheels, 250 g weights
    Legend withstands up to 300 cycles

    Gloss (60°):
    5 Gardner Units

    Service Temperature:
    -40°F to 158°F (-40°C to 70°C)

    Average Outdoor Durability:
    Not recommended.

    Chemical Resistance:

    REAGENT
    RUB TEST
    30% Sulfuric Acid
    NE
    10% Sulfuric Acid
    NE
    30% HCI
    NE
    10% HCI
    NE
    50% NaOH
    NE
    10% NaOH
    NE
    Methyl Ethyl Ketone
    F
    Acetone
    F
    1,1,1-Trichloroethane
    F
    Methanol
    F
    IPA (Isopropanol)
    F
    ASTM #3 Oil
    NE
    SAE 20 Oil
    NE
    Alconox®
    NE
    Toluene
    F
    Mineral Spirits< /td>
    NE
    Glacial Acetic Acid
    F
    5% Acetic Acid
    NE
    Diesel Fuel
    NE
    Heptane
    NE
    Cellosolve Acetate
    F
    Conc. Ammonia
    NE
    10% Ammonia
    NE
    Turpentine
    NE
    Kerosene
    NE
    Water
    NE
    Gasoline
    F

    NE = No Effect
    NT = Not Tested
    F = Failed (affected Sample)

    Rub Test: Rubbed sample for 1 minute with swab soaked in reagent.

    Shelf Life:
    Unlimited when stored at 70°F (21°C) and 40% to 50% R.H.





    Trademarks:
    Alconox® is a registered trademark of Alconox Co.
    Signmark® is a registered trademark of Brady Worldwide, Inc.
    ASTM: American Society for Testing and Materials (U.S.A.)
    SAE: Society of Automotive Engineers (U.S.A.)
    All S.I. Units (metric) are mathematically derived from the U.S. Conventional
    Units.

    Note: All values shown are averages and should not be used for specification purposes.
    Test data and test results contained in this document are for general information only and shall not be relied upon by Brady customers for designs and specifications, or be relied on as meeting specified performance criteria. Customers desiring to develop specifications or performance criteria for specific product applications should contact Brady for further information.

    Product compliance information is based upon information provided by suppliers of the raw materials used by Brady to manufacture this product or based on results of testing using recognized analytical methods performed by a third party, independent laboratory. As such, Brady makes no independent representations or warranties, express or implied, and assumes no liability in connection with the use of this information.


    WARRANTY
    Brady products are sold with the understanding that the buyers will test them in actual use and determine for themselves their adaptability to their intended uses. Brady warrants to the buyers that its products are free from defects in material and workmanship, but limits its obligation under this warranty to replacement of the product shown to Brady's satisfaction to have been defective at the time Brady sold it. This warranty does not extend to any persons obtaining the product from the buyers. This warranty is in lieu of any other warranty, express or implied, including, but not limited to, any implied warranty of merchantability or fitness for a particular purpose, and of any other obligations or liability on Brady's part. Under no circumstances will Brady be liable for any loss, damage, expense, or consequential damages of any kind arising in connection with the use, or inability to use, Brady's products.

    Copyright 2011 Brady Worldwide, Inc. | All Rights Reserved
    Material may not be reproduced or distributed in any form without written permission.

    Brady North America | 6555 W. Good Hope Rd | Milwaukee, WI 53223 | USA | Tel: 414-358-6600 | Fax: 800-292-2289
     
     

    Brady identifies and protects products, people, and premises with high performance labels, industrial label printers, software, safety & facility identification, spill control, Lockout Tagout solutions and more. Brady helps you create and maintain safer work environments and comply with regulatory standards. Our high-performance materials clearly identify products, components and other assets, even in the most extreme conditions.