• Print Page

    • Technical Data Sheets

     

    Search Technical Data Sheets



    Technical Data Sheet

    BRADY B-325 OMNI-GRIP VINYL SLEEVE MARKERS

    TDS No. B-325
    Effective Date: 21-Feb-2000

    Description:
    Brady B-325 Omni-Grip® Markers are printed, full circle polyvinyl chloride sleeves, with a molded in expansion feature. The markers are chevron cut for alignment and are mounted on a "T" bar dispenser strip for convenience.

    B-325 Omni-Grip® Markers are used in manufacturing, construction, and maintenance activities to identify wires and cables where environmental conditions require the permanence of a sleeve.

    The expansion feature molded into the B-325 Omni-Grip® Markers enables them to fit a wide range of wire sizes. The printing has good rub and chemical resistance. B-325 Markers are yellow sleeves with black printing.


    Details:


    PERFORMANCE PROPERTIES
    TEST METHODS
    TYPICAL RESULTS
    Long Term High Service Temperature 30 days at 212°F (100°C) Moderate discoloration at 100°C but still functional; no visible effect at 60°C
    Long Term Low Service Temperature 30 days at -40°F (-40°C) No visible effect at -40°C
    Short Term High Service Temperature 15 minutes at 248°F (120°C) No visible effect, material distorts at greater temperatures
    Humidity Resistance 30 days at 100°F (37°C), 95% R.H. No visible effect
    UV Light Resistance 30 days in UV Sunlighter™ 100 No visible effect
    Weatherability ASTM G 26
    30 days in Xenon Arc Weatherometer    		 Slight color fade, no visible effect to printing
    Salt Fog Resistance ASTM B 117
    30 days in 5% salt fog solution chamber    		 No visible effect

    PERFORMANCE PROPERTY
    CHEMICAL RESISTANCE
    Testing consisted of 5 cycles of 10 minute immersions in the specified chemicals followed by 30 minute recovery periods. After final immersion, markers rubbed immediately with cotton swab. Testing was conducted at room temperature.

    CHEMICAL REAGENT
    SUBJECTIVE OBSERVATION OF VISUAL CHANGE
    APPEARANCE OF MARKER AND PRINTING WITHOUT RUB
    APPEARANCE OF MARKER AND PRINTING WITH RUB
    Methyl Ethyl Ketone Material very swollen Print removed
    1,1,1-Trichloroethane Material slightly swollen Print removed
    Isopropyl Alcohol Slight unwrap No visible effect
    JP-8 Jet Fuel No visible effect No visible effect
    SAE 20 WT Oil No visible effect No visible effect
    Mil 5606 Oil No visible effect No visible effect
    Speedi Kut Cutting Oil 332 No visible effect No visible effect
    Gasoline Slight unwrap Adhesive ooze
    Rust Veto® 377 No visible effect No visible effect
    Skydrol® 500B-4 Material slightly swollen Print removed
    Super Agitene® No visible effect No visible effect
    Deionized Water No visible effect No visible effect
    3% Alconox® Detergent No visible effect No visible effect
    Northwoods™ Buzz Saw Citrus Degreaser No visible effect No visible effect

    Product testing, customer feedback, and history of similar products, support a customerperformance expectation of at leasttwo years from the date of receipt for this product as long as this product is stored in its original packaging in an environment below 80 degrees F (27 degrees C) and 60% RH . We are confident that our product will perform well beyond this time frame. However, it remains the responsibility of the user to assess the risk of using such product. We encourage customers to develop functional testing protocols that will qualify a product's fitness for use, in their actual applications.





    Trademarks:
    Alconox® is a registered trademark of Alconox Co.
    Northwoods™ is a trademark of the Superior Chemical Corporation
    Omni-Grip® is a registered trademark of Brady Worldwide, Inc.
    Rust Veto® is a registered trademark of the E.F. Houghton & Co.
    Skydrol® is a registered trademark of the Monsanto Company
    Sunlighter™ is a trademark of the Test Lab Apparatus Company
    Super Agitene® is a registered trademark of Graymills Corporation
    ASTM: American Society for Testing and Materials (U.S.A.)
    SAE: Society of Automotive Engineers (U.S.A.)
    All S.I. Units (metric) are mathematically derived from the U.S. Conventional
    Units.

    Note: All values shown are averages and should not be used for specification purposes.
    Test data and test results contained in this document are for general information only and shall not be relied upon by Brady customers for designs and specifications, or be relied on as meeting specified performance criteria. Customers desiring to develop specifications or performance criteria for specific product applications should contact Brady for further information.

    Product compliance information is based upon information provided by suppliers of the raw materials used by Brady to manufacture this product or based on results of testing using recognized analytical methods performed by a third party, independent laboratory. As such, Brady makes no independent representations or warranties, express or implied, and assumes no liability in connection with the use of this information.


    WARRANTY
    Brady products are sold with the understanding that the buyers will test them in actual use and determine for themselves their adaptability to their intended uses. Brady warrants to the buyers that its products are free from defects in material and workmanship, but limits its obligation under this warranty to replacement of the product shown to Brady's satisfaction to have been defective at the time Brady sold it. This warranty does not extend to any persons obtaining the product from the buyers. This warranty is in lieu of any other warranty, express or implied, including, but not limited to, any implied warranty of merchantability or fitness for a particular purpose, and of any other obligations or liability on Brady's part. Under no circumstances will Brady be liable for any loss, damage, expense, or consequential damages of any kind arising in connection with the use, or inability to use, Brady's products.

    Copyright 2011 Brady Worldwide, Inc. | All Rights Reserved
    Material may not be reproduced or distributed in any form without written permission.

    Brady North America | 6555 W. Good Hope Rd | Milwaukee, WI 53223 | USA | Tel: 414-358-6600 | Fax: 800-292-2289
     
     

    Brady identifies and protects products, people, and premises with high performance labels, industrial label printers, software, safety & facility identification, spill control, Lockout Tagout solutions and more. Brady helps you create and maintain safer work environments and comply with regulatory standards. Our high-performance materials clearly identify products, components and other assets, even in the most extreme conditions.