| TDS No. B-389 |
Effective Date: 05-Feb-2002
|
Description:
Brady B-389 Inserts are printable rigid inserts designed to be printed and affixed to a wire using extruded, clear PVC Brady Wire Marking Carriers.
Brady B-389 Inserts are supplied roll form formatted for dot matrix printing on ID PRO® Plus Wiremarker Printer, LS2000 Labeling System, and desktop printers. B-389 is available in white and yellow. Other colors are available upon request.
The Brady Series 7300 high performance ribbon is recommended for the best dot matrix print performance in the ID PRO® Wiremarker Printer. The Brady Series 5000 high performance ribbon is recommended for the best dot matrix print performance in the LS2000 Labeling System and the Sleeve and Datab® Printer. B-389 can also be printed with the Brady Series 2000 ribbon.
B-389 is supplied in a custom height and two widths which are compatible with carriers. The available widths are 0.5" (12.7 mm) and 1.0" (25.4 mm). Brady Wire Marking Carriers are supplied cut to length. Available lengths include 15 mm and 30 mm. Sizes are for marking wires from 1.3 mm to 16.0 mm in diameter (OD).
Exposing the inserts to UV light for an extended period of time will reduce the scratch resistance of the product. B-389 is designed for one time use only
Brady B-389 meets the requirements of a halogen-free material per DIN VDE 0472 part 815. (Statement based on review of product construction and confirmatory halogen content test run at an independent test laboratory.)
|
Details:
|
PERFORMANCE PROPERTIES
|
TEST METHODS
|
TYPICAL RESULTS
B-389
|
TYPICAL RESULTS
CARRIER
|
| High Service Temperature |
1000 hrs at 212°F (100°C) |
Slight series 5000 print bleed. No visible effect to series 7300 print. |
Slight discoloration |
| Low Service Temperature |
1000 hrs at -40°F (-40°C) |
No visible effect. |
No visible effect |
| Humidity Resistance |
1000 hrs at 100°F (37°C), 95% R.H. |
Slight series 5000 and 7300 print bleed. |
No visible effect |
| UV Light Resistance |
1000 hrs in UV Sunlighter™ 100 |
Slight topcoat discoloration. No visible effect to print. |
Slight discoloration |
| Weatherability |
ASTM G155, Cycle 1
1000 hrs in Xenon Arc Weatherometer |
Complete topcoat removal. |
Slight discoloration |
Marking Permanence
MIL-M-81531
20 erasure rubs |
20 eraser rubs with hard hand pressure |
No visible effect. |
Not applicable |
|
PERFORMANCE PROPERTY
|
CHEMICAL RESISTANCE
|
Samples were printed with Series R5000 ribbons and dwelled 24 hours prior to test. Testing consisted of 5 cycles of 10 minute immersions in the specified chemicals followed by 30 minute recovery periods. After the final immersion, the samples were rubbed with cotton swabs. Testing was conducted with inserts outside of carriers at room temperature; results are improved when samples are tested after inserting into carriers. Carrier results are from tests without the inserts.
|
CHEMICAL REAGENT
|
APPEARANCE OF INSERT AND PRINT WITHOUT RUB
|
APPEARANCE OF INSERT AND PRINT WITH RUB
|
APPEARANCE OF CARRIER
|
| Methyl Ethyl Ketone |
Topcoat removed |
Topcoat removed |
Completely destroyed< /font> |
| 1,1,1-Trichloroethane |
Topcoat removed |
Topcoat removed |
Carrier hardened |
| Alcohol Mix* |
No visible effect |
No visible effect |
No visible effect |
| Mineral Spirits |
No visible effect |
No visible effect |
No visible effect |
| JP-8 Jet Fuel |
No visible effect |
Slight print smear |
No visible effect |
| SAE 20 WT Oil |
Insert strained cream, no visible effect |
No visible effect |
No visible effect |
| ASTM #3 Oil |
Insert strained yellow, no visible effect |
No visible effect |
Carrier tinted yellow |
| Mil 5606 Oil |
Insert stained peach, no visible effect to print |
No visible effect |
Carrier tinted pink |
| Mil 7808 Oil |
Insert stained orange, no visible effect to print |
No visible effect |
Carrier tinted brown |
| Thread Ezy® |
Insert stained tan, no visible effect to print |
No visible effect |
Carrier tinted brown |
| Skydrol® 500B-4 |
Moderate print fade |
Topcoat removed |
Carrier tinted purple and severely deformed |
| Super Agitene® |
Insert stained pale green, no visible effect to print |
No visible effect |
Carrier tinted green |
| CFC Free-Electro Wash 2000 |
Slight print fade |
Topcoat removed |
Carrier hardened |
| Deionized Water |
No visible effect |
No visible effect |
No visible effect |
| 3% Alconox® Detergent |
No visible effect |
No visible effect |
No v isible effect |
| 10% Sulfuric Acid Solution |
No visible effect |
Slight print fade |
No visible effect |
| 5% Salt Water Solution |
No visible effect |
No visible effect |
No visible effect |
* Alcohol Mix is 50% ethanol, 30% methanol, and 20% water by volume.
Product testing, customer feedback, and history of similar products, support a customerperformance expectation of at leasttwo years from the date of receipt for this product as long as this product is stored in its original packaging in an environment below 80 degrees F and 60% RH . We are confident that our product will perform well beyond this time frame. However, it remains the responsibility of the user to assess the risk of using such product. We encourage customers to develop functional testing protocols that will qualify a product's fitness for use, in their actual applications.
|
Trademarks:
Alconox® is a registered trademark of Alconox Co.
Datab® is a registered trademark of Brady Worldwide, Inc.
ID PRO® is a registered trademark of Brady Worldwide, Inc.
Skydrol® is a registered trademark of the Monsanto Company
Sunlighter™ is a trademark of the Test Lab Apparatus Company
Super Agitene® is a registered trademark of Graymills Corporation
Thread Ezy® is a registered trademark of the Toledo-Bever Tools Company
ASTM: American Society for Testing and Materials (U.S.A.)
SAE: Society of Automotive Engineers (U.S.A.)
All S.I. Units (metric) are mathematically derived from the U.S. Conventional
Units.
|
Note: All values shown are averages and should not be used for specification purposes.
Test data and test results contained in this document are for general information only and shall not be relied upon by Brady customers for designs and specifications, or be relied on as meeting specified performance criteria. Customers desiring to develop specifications or performance criteria for specific product applications should contact Brady for further information.
Product compliance information is based upon information provided by suppliers of the raw materials used by Brady to manufacture this product or based on results of testing using recognized analytical methods performed by a third party, independent laboratory. As such, Brady makes no independent representations or warranties, express or implied, and assumes no liability in connection with the use of this information. |
WARRANTY
Brady products are sold with the understanding that the buyers will test them in actual use and determine for themselves their adaptability to their intended uses. Brady warrants to the buyers that its products are free from defects in material and workmanship, but limits its obligation under this warranty to replacement of the product shown to Brady's satisfaction to have been defective at the time Brady sold it. This warranty does not extend to any persons obtaining the product from the buyers. This warranty is in lieu of any other warranty, express or implied, including, but not limited to, any implied warranty of merchantability or fitness for a particular purpose, and of any other obligations or liability on Brady's part. Under no circumstances will Brady be liable for any loss, damage, expense, or consequential damages of any kind arising in connection with the use, or inability to use, Brady's products. |
Copyright 2007 Brady Worldwide, Inc. | All Rights Reserved
Material may not be reproduced or distributed in any form without written permission. |
