• Print Page

    • Technical Data Sheets

     

    Search Technical Data Sheets



    Technical Data Sheet

    BRADY B-424 THERMAL TRANSFER PRINTABLE WHITE PAPER LABEL STOCK

    TDS No. B-424
    Effective Date: 11-Jun-2009

    Description:

    GENERAL

    Print Technology:  Thermal Transfer

    Material Type: White Paper

    Finish:  Matte

    Adhesive:  Permanent Rubber

     

    APPLICATIONS

    Low cost, general purpose labeling 

     

    RECOMMENDED RIBBONS

    Brady Series R4300 and R6100 black ribbons

    Brady Series R4500 colored ribbons (red, blue, green)

     

    REGULATORY

    Brady B-424 is RoHS compliant to 2005/618/EC MCV amendment to RoHS Directive 2002/95/EC.

     

    SPECIAL FEATURES

    Brady B-424 provides good contrast and smear resistance for thermal transfer and barcode printing.



    Details:


    PHYSICAL PROPERTIES
    TEST METHODS
    AVERAGE RESULTS
    Thickness ASTM D 1000
    -Substrate
    -Adhesive
    -Total
    0.0030 inch (0.0762 mm)
    0.0005 inch (0.0127 mm)
    0.0035 inch (0.0889 mm)
    Adhesion to:
    -Stainless Steel
    -Textured ABS
    -Polypropylene
    -Corrugated Cardboard    		 ASTM D 1000
    20 minute dwell
    Destroys upon removal
    from all listed surfaces.
    Tack ASTM D 2979
    Polyken™ Probe Tack
    (1 second dwell, 1 cm/sec separation)
    18 oz (500 g)
    Drop Shear PSTC-7 (except use 1/2" x 1" sample)
    5 hours
    Tensile Strength and Elongation ASTM D 1000
    -Machine
    15 lbs/inch (N/100 mm), 10%

    Performance properties tested on B-424 printed with Series R4300 and R6100 on BradyPrinter™ THT Model 203X thermal transfer printer. Printed samples of B-424 were laminated to aluminum and allowed to dwell 24 hours before exposure to the indicated environmental conditions.


    PERFORMANCE PROPERTIES
    TEST METHOD
    TYPICAL RESULTS
    Short Term High Service Temperature 5 minutes at 320°F (160°C) No visible effect at 160°C, slight label discoloration at 180°C
    Long Term High Service Temperature 30 days at 122°F (50°C) No visible effect at 50°C, at 60°C label discolors slightly but still functional
    Low Service Temperature 30 days at -40°F (-40°C) No visible effect
    Humidity Resistance 30 days at 100°F (37°C) and 95% R.H. No visible effect
    UV Light Resistance 30 days in UV Sunlighter™ 100 Label discolors slightly but still functional
    Abrasion Resistance Taber Abraser, CS-10 grinding wheels, 500 g/arm (Fed. Std. 191A, Method 5306) Print legible to:
    R4300: 50 cycles
    R6100: 40 cycles

    Product testing, customer feedback, and history of similar products, support a customerperformance expectation of at leasttwo years from the date of receipt for this product as long as this product is stored in its original packaging in an environment below 80 degrees F (27 degrees C) and 60% RH . We are confident that our product will perform well beyond this time frame. However, it remains the responsibility of the user to assess the risk of using such product. We encourage customers to develop functional testing protocols that will qualify a product's fitness for use, in their actual applications.





    Trademarks:
    BradyPrinter™ is a trademark of Brady Worldwide, Inc.
    Polyken™ is a trademark of Testing Machines Inc.
    Sunlighter™ is a trademark of the Test Lab Apparatus Company
    ASTM: American Society for Testing and Materials (U.S.A.)
    PSTC: Pressure Sensitive Tape Council (U.S.A.)
    All S.I. Units (metric) are mathematically derived from the U.S. Conventional
    Units

    Note: All values shown are averages and should not be used for specification purposes.
    Test data and test results contained in this document are for general information only and shall not be relied upon by Brady customers for designs and specifications, or be relied on as meeting specified performance criteria. Customers desiring to develop specifications or performance criteria for specific product applications should contact Brady for further information.

    Product compliance information is based upon information provided by suppliers of the raw materials used by Brady to manufacture this product or based on results of testing using recognized analytical methods performed by a third party, independent laboratory. As such, Brady makes no independent representations or warranties, express or implied, and assumes no liability in connection with the use of this information.


    WARRANTY
    Brady products are sold with the understanding that the buyers will test them in actual use and determine for themselves their adaptability to their intended uses. Brady warrants to the buyers that its products are free from defects in material and workmanship, but limits its obligation under this warranty to replacement of the product shown to Brady's satisfaction to have been defective at the time Brady sold it. This warranty does not extend to any persons obtaining the product from the buyers. This warranty is in lieu of any other warranty, express or implied, including, but not limited to, any implied warranty of merchantability or fitness for a particular purpose, and of any other obligations or liability on Brady's part. Under no circumstances will Brady be liable for any loss, damage, expense, or consequential damages of any kind arising in connection with the use, or inability to use, Brady's products.

    Copyright 2011 Brady Worldwide, Inc. | All Rights Reserved
    Material may not be reproduced or distributed in any form without written permission.

    Brady North America | 6555 W. Good Hope Rd | Milwaukee, WI 53223 | USA | Tel: 414-358-6600 | Fax: 800-292-2289
     
     

    Brady identifies and protects products, people, and premises with high performance labels, industrial label printers, software, safety & facility identification, spill control, Lockout Tagout solutions and more. Brady helps you create and maintain safer work environments and comply with regulatory standards. Our high-performance materials clearly identify products, components and other assets, even in the most extreme conditions.