Brady Material B431 Technical Data Sheet


	Technical Data Sheet

BRADY B-431 PLASTIC BIOHAZARD SAFETY SIGN

TDS No. B-431

Effective Date: 25-Jul-2005

Description:

Brady B-431 Plastic Biohazard Safety Sign is a polystyrene/synthetic film laminate sign panel. Sign panels are overlaminated for increased chemical and abrasion resistance.

Details:

Use:
Brady B-431 signs are used to identify the actual or potential presence of biologically hazardous materials.

Relevant Standards:
Meets OSHA Standards 1910.145(e)(4) and 1910.1030(g)(1)

Material Construction:
High impact polystyrene/synthetic film laminate.

Standard Legend Colors:
Black

Thickness (ASTM D 1593):
Total: 0.083 in. (2.10 mm)

Abrasion Resistance (Method 5306 of U.S. Federal Test Method Std. No. 191A):
CS-17 wheels, 1000 g wts.
Overlaminate withstands up to 4000 cycles

Service Temperature:
-40°F to 158°F (-40°C to 70°C)

Chemical Resistance:

REAGENT	7 DAY IMMERSION	DIP TEST
30% Sulfuric Acid	NE	NE
10% Sulfuric Acid	NE	NE
30% Hydrochloric Acid	NE	NE
10% Hydrochloric Acid	NE	NE
Glacial Acetic Acid	F	F
5% Acetic Acid	NE	NE
50% Sodium Hydroxide	F	NE
10% Sodium Hydroxide	F	NE
10% Ammonia	NE	NE
5% Sodium Hypochlorite	NE	NE
10% Sodium Chloride	NE	NE
MEK	F	F
Acetone	F	F
Toluene	F	NE
Methanol	F	NE
Isopropyl Alcohol	F	NE
Heptane	F	NE
Mineral Spirits	NE	NE
Turpentine	F	F
Diesel Fuel	F	NE
Kerosene	F	NE
Gasoline	F	F
ASTM #3 Oil	NE	NE
SAE 20 Oil	NE	NE
Alconox®	NE	NE
Water	NE	NE

NE = No Effect
F = Failed (affected Sample)

7 Day Immersion: Immersed in reagent for 7 days.
Dip Test: Five 10 minute dips in reagent with 30 minute recovery.

Shelf Life:
Unlimited when stored at 70°F and 40% to 50% R.H.

Trademarks:
Alconox® is a registered trademark of Alconox Co.
Signmark® is a registered trademark of Brady Worldwide, Inc.
ASTM: American Society for Testing and Materials (U.S.A.)
Fed. Spec.: United States Federal Specification (U.S.A.)
OSHA: Occupational Safety & Health Administration
PSTC: Pressure Sensitive Tape Council (U.S.A.)

Note: All values shown are averages and should not be used for specification purposes.
Test data and test results contained in this document are for general information only and shall not be relied upon by Brady customers for designs and specifications, or be relied on as meeting specified performance criteria. Customers desiring to develop specifications or performance criteria for specific product applications should contact Brady for further information.

Product compliance information is based upon information provided by suppliers of the raw materials used by Brady to manufacture this product or based on results of testing using recognized analytical methods performed by a third party, independent laboratory. As such, Brady makes no independent representations or warranties, express or implied, and assumes no liability in connection with the use of this information.

WARRANTY
Brady products are sold with the understanding that the buyers will test them in actual use and determine for themselves their adaptability to their intended uses. Brady warrants to the buyers that its products are free from defects in material and workmanship, but limits its obligation under this warranty to replacement of the product shown to Brady's satisfaction to have been defective at the time Brady sold it. This warranty does not extend to any persons obtaining the product from the buyers. This warranty is in lieu of any other warranty, express or implied, including, but not limited to, any implied warranty of merchantability or fitness for a particular purpose, and of any other obligations or liability on Brady's part. Under no circumstances will Brady be liable for any loss, damage, expense, or consequential damages of any kind arising in connection with the use, or inability to use, Brady's products.

Brady North America | 6555 W. Good Hope Rd | Milwaukee, WI 53223 | USA | Tel: 414-358-6600 | Fax: 800-292-2289

Product, Facility, & Safety Identification Solutions

Technical Data Sheet

BRADY B-431 PLASTIC BIOHAZARD SAFETY SIGN