back to last screen


Technical Data Sheet

BRADY B-459 THERMAL TRANSFER PRINTABLE MATTE WHITE POLYESTER LABEL STOCK

TDS No. B-459
Effective Date: 11-Jun-2009

Description:

GENERAL

Print Technology:  Thermal Transfer

Material Type:  White Polyester

Finish:  Matte

Adhesive:  Permanent Acrylic

 

APPLICATIONS

Designed for applications such as topside of printed circuit boards and rating plates that utilize high quality/density alphanumerics, barcodes and graphics.

 

RECOMMENDED RIBBONS

Brady Series R4900 and R6000 black ribbons

Brady Series R4400 colored (red, green, blue) ribbons

 

REGULATORY/AGENCY APPROVALS

UL:  B-459 is UL Recognized to UL 969 Labeling and Marking Standard when printed with  Brady Series R4900 or R6000 black and R4400 colored ribbons.  See UL file MH17154 for specific details.

CSA:   B-459 is CSA Accepted to C22.2 No.0.15-95 Adhesive Labels Standard when printed with Brady Series R4900 and R6000 ribbon. See CSA file 041833 for specific details.

 

Brady B-459 is RoHS compliant to 2005/618/EC MCV amendment to RoHS Directive 2002/95/EC.



Details:


PHYSICAL PROPERTIES
TEST METHODS
AVERAGE RESULTS
Thickness ASTM D 1000
-Substrate
-Adhesive
-Total
 
0.0023 inch (0.0584 mm)
0.0008 inch (0.0203 mm)
0.0031 inch (0.0787 mm)
Adhesion to:
-Stainless Steel


-Polypropylene		 ASTM D 1000
20 minute dwell
24 hour dwell

20 minute dwell
24 hour dwell
 
44 oz/in (48 N/100 mm)
49 oz/in (54 N/100 mm)

31 oz/in (34 N/100 mm)
43 oz/in (47 N/100 mm)
Tensile Strength and Elongation ASTM D 1000
-Machine
 
44 lbs/in (765 N/100 mm), 90%
Tack ASTM D 2979
Polyken™ Probe Tack
1 second dwell
 
19 oz (526 g)
Performance properties tested on B-459 printed with R4000, R4900 and R6000 black and R4400 colored ribbons using the BradyPrinter™ 300X thermal printer. Printed samples were laminated to aluminum and allowed to dwell 24 hours before exposure to the indicated environments. Unless noted, results the same for all ribbons.


PERFORMANCE PROPERTIES
TEST METHODS
TYPICAL RESULTS
Short Term High Service Temperature 5 minutes at 356°F (180°C) No visible effect at 180°C
Label shrinkage at 210°C
Long Term High Service Temperature 30 days at 212°F (100°C) No visible effect at 100°C
Label yellowed at 120°C
Low Service Temperature 30 days at -40°F (-40°C) No visible effect
Humidity Resistance 30 days at 100°F (37°C), 95% R.H. No visible effect
UV Light Resistance 30 days in UV Sunlighter™ 100 Severe yellow ing of topcoat
Weatherability ASTM G155, Cycle 1
30 days in Xenon Arc Weatherometer		 Slight topcoat discoloration and chalking. R4400 red print removed.
Salt Fog Resistance ASTM B 117
30 days in 5% salt fog solution chamber		 No visible effect
Abrasion Resistance Taber Abraser, CS-10 grinding wheels, 500 g/arm (Fed. Std. 191A, Method 5306) Print legible to:
R4000= 30 cycles
R4900= 150 cycles
R6000= 300 cycles
R4400= 100 cycles
PERFORMANCE PROPERTY
CHEMICAL RESISTANCE
Samples printed with Series R4000, R4900 and R6000 ribbons using a BradyPrinter™ THT Model 300X thermal transfer printer. Samples laminated to aluminum panels and allowed to dwell 24 hours prior to testing. Test conducted at room temperature. Testing consisted of 5 cycles of 10 minute immersions in the specified test fluid followed by a 30 minute recovery period. After final immersion, samples rubbed 10 times with cotton swab saturated with test fluid.

CHEMICAL REAGENT
SUBJECTIVE OBSERVATION OF VISUAL CHANGE
EFFECT TO LABEL STOCK
R4000
R4900/R60001
Methyl Ethyl Ketone Topcoat degraded Print removed when immersed Print removed when immersed
1,1,1-Trichloroethane No visible effect Print removed when immersed No visible effect w/o rub, print removed after rub
Isopropyl Alcohol No visible effect No visible effect w/o rub, print removal after rub No visible effect
Mineral Spirits No visible effect No visible effect w/o rub, print removal after rub No visible effect
SAE 20 WT Oil @ 70°C No visible effect No visible effect w/o rub, print removal after rub No visible effect
Mil 5606 Oil No visible effect No visible effect No visible effect
Speedi Kut Cutting Oil 332 No visible effect No visible effect No visible effect
Gasoline Slight yellowing No visible effect w/o rub, print removal after rub No visible effect w/o rub, slight print removal after rub
Rust Veto® 342 Slight yellowing No visible effect w/o rub, print removal after rub No visible effect
Northwoods™ Buzz Saw Degreaser No visible effect No visible effect w/o rub, print removal after rub No visible effect
Deionized Water No visible effect No visible effect No visible effect
5% Salt Solution No visible effect No visible effect No visible effect
3% Alconox® Detergent No visible effect No visible effect No visible effect
10% Sodium Hydroxide Solution No visible effect No visible effect w/o rub, print removal after rub No visible effect
10% Sulfuric Acid Solution No visible effect No visible effect No visible effect
1Results the same with R4900 and R6000 ribbon. Solvent resistance results for R4400 colored ribbons not reported.

Product testing, customer feedback, and history of similar products, support a customerperformance expectation of at leasttwo years from the date of receipt for this product as long as this product is stored in its original packaging in an environment below 80 degrees F and 60% RH . We are confident that our product will perform well beyond this time frame. However, it remains the responsibility of the user to assess the risk of using such product. We encourage customers to develop functional testing protocols that will qualify a product's fitness for use, in their actual applications.





Trademarks:
Alconox® is a registered trademark of Alconox Co.
BradyPrinter™ is a trademark of Brady Worldwide, Inc.
Northwoods™ is a trademark of the Superior Chemical Corporation
Polyken™ is a trademark of Testing Machines Inc.
Rust Veto® is a registered trademark of the E.F. Houghton & Co.
Sunlighter™ is a trademark of the Test Lab Apparatus Company
ASTM: American Society for Testing and Materials (U.S.A.)
CSA: Canadian Standards Association
SAE: Society of Automotive Engineers (U.S.A.)
UL: Underwriters Laboratories Inc. (U.S.A.)
All S.I. Units (metric) are mathematically derived from the U.S. Conventional
Units.

Note: All values shown are averages and should not be used for specification purposes.
Test data and test results contained in this document are for general information only and shall not be relied upon by Brady customers for designs and specifications, or be relied on as meeting specified performance criteria. Customers desiring to develop specifications or performance criteria for specific product applications should contact Brady for further information.

Product compliance information is based upon information provided by suppliers of the raw materials used by Brady to manufacture this product or based on results of testing using recognized analytical methods performed by a third party, independent laboratory. As such, Brady makes no independent representations or warranties, express or implied, and assumes no liability in connection with the use of this information.


WARRANTY
Brady products are sold with the understanding that the buyers will test them in actual use and determine for themselves their adaptability to their intended uses. Brady warrants to the buyers that its products are free from defects in material and workmanship, but limits its obligation under this warranty to replacement of the product shown to Brady's satisfaction to have been defective at the time Brady sold it. This warranty does not extend to any persons obtaining the product from the buyers. This warranty is in lieu of any other warranty, express or implied, including, but not limited to, any implied warranty of merchantability or fitness for a particular purpose, and of any other obligations or liability on Brady's part. Under no circumstances will Brady be liable for any loss, damage, expense, or consequential damages of any kind arising in connection with the use, or inability to use, Brady's products.

Copyright 2009 Brady Worldwide, Inc. | All Rights Reserved
Material may not be reproduced or distributed in any form without written permission.

Brady North America | 6555 W. Good Hope Rd | Milwaukee, WI 53223 | USA | Tel: 414-358-6600 | Fax: 800-292-2289
Email This Page
Copyright 2009 Brady Worldwide, Inc.