Product, Facility, & Safety Identification Solutions

Use:
Brady B-564 BradyGlo™ High Intensity Anti-Slip Floor Material is used for signs and tape, such as: low-level exit path markings, floor mounted signs, steps, leading edge of landings, and floor perimeter demarcation lines.

Relevant Standards:
Complies with all indoor use requirements specified in RS 6-1 and 6-1A of New York Local Law 26 including photoluminescence, washability, flammability, toxic gas generation, and radioactivity.

Approved Model Numbers Accepted For Use, City of New York, Department of Buildings: MEA No. 276-05-M BR: 38-9-6

Inherent Properties:
Brady B-564 is a non-toxic, non-radioactive, explosion safe (does not generate energy to induce explosions) material allowing for safe and effective egress marking.

Illuminescent Characteristics:
Illumination: 21.6 lux (2 foot-candles) for 2 hours with a 4100K cool white fluorescent lamp.
Luminance (after illumination): 10 minutes 38 mcd/m2
60 minutes 9 mcd/m2
90 minutes 6 mcd/m2

Adhesive Type:
Pressure Sensitive Synthetic Rubber

Substrate Type:
Phosphorescent polyester film overlaminated with a velvet embossed rigid clear vinyl overlaminate.

Adhesive Properties (PSTC-101):
Adhesion to Stainless Steel (PSTC-1)
15 Minute Dwell (Avg.) -- 168 oz/in. (184 N/100mm)
Ultimate Dwell (72 Hrs.) (Avg.) -- 190 oz/in. (208 N/100mm)

Abrasion Resistance (Method 5306 of U.S. Federal Test Method Std. No. 191A):
H-22 wheels, 1000 g wts.
Overlaminate withstands up to 7000 cycles

Thickness (PSTC-133):
0.021 in. (.53 mm)

Minimum Application Temperature:
50°F (10°C)

Service Temperature:
-40°F to 140°F (-40°C to 60°C)

Chemical Resistance:

NE = No Effect
F = Failed

Dip Test: Five 10 minute dips in reagent with 30 minute recovery.

Shelf Life
1 year when stored at 70°F (21°C) and 40% to 50% RH.