Use:
Brady B-582 is used for exit and directional signs, identification of fire alarms and extinguishers, low location egress pathway markings, and directional systems for escape or evacuations routes. In accordance with ASTM 2030-99: Recommended Uses of Photoluminescent Safety Markings.
Relevant Standards:
Meets or exceeds the following standards. ASTM E-2072-00 / ASTM E-2073-00, ASTM E-162, ASTM E-648, ASTM E-662, IMO Resolution A.752(18), ISO/CD 15370, Marine Safety Committee MSC.27(61), DIN 67 510 (Parts 1 - 4), and PSPA Standard 002 Part 2.
Meets OSHA 1910.37. Lloyd's Register SAS F050294.p
Inherent Properties:
Brady B-582 is a non-toxic, non-radioactive, explosion safe (does not generate energy to induce explosions) material allowing for sanitary disposal.
Illuminescent Characteristics:
Charge time of 5 minutes @ 1000 Lux will charge the sign for +10 hours of glow time. Consistent glow life and unlimited rechargability throughout service life.
Illumination: 21.6 lux (2 foot-candles) for 2 hours with a 4100K white flourescent lamp.
Luminance (after illumination):
10 minutes >25 mcd/m2
60 minutes >5 mcd/m2
90 minutes >3 mcd/m2
Adhesive Type:
Pressure Sensitive Acrylic
Substrate Type:
Phosphorescent Polyester Film
Standard Legend Colors:
Black, green, red, and blue
Thickness (PSTC-33):
0.008 in. (0.20 mm)
Adhesive Properties:
Adhesion to Stainless Steel (PSTC-101)
15 Minute Dwell (Avg.) - 110 oz/in
Ultimate Dwell (72 hrs) (Avg.) - 110 oz/in
Abrasion Resistance (Method 5306 of U.S. Federal Test Method Std. No. 191A):
CS-10 Wheels, 250g wts.
Legend withstands up to 100 cycles
CS-17 Wheels, 1000g wts.
Substrate withstands up to 9000 cycles
Gloss (ASTM D-523):
60°- 121 Gardner Units
Minimum Application Temperature:
50°F (10°C)
Service Temperature:
-40°F to 176°F (-40°C to 80°C)
Expected Service Life of Adhesive and Printed Legend:
Average of 5 years
Outdoor Applications:
Not recommended for outdoor application
Chemical Resistance
|
REAGENT
|
7 DAY IMMERSION
|
DIP TEST
|
RUB TEST
|
| 30% Sulfuric Acid |
NE
|
NE
|
NE
|
| 10% Sulfuric Acid |
NE
|
NE
|
NE
|
| 30% Hydrochloric Acid |
NE
|
NE
|
NE
|
| 10% Hydrochloric Acid |
NE
|
NE
|
NE
|
| Glacial Acetic Acid |
F
|
NE
|
F
|
| 5% Acetic Acid |
F
|
NE
|
NE
|
| 50% Sodium Hydroxide |
F
|
NE
|
NE
|
| 10% Sodium Hydroxide |
F
|
NE
|
NE
|
| 10% Ammonia |
NE
|
NE
|
NE
|
| 5% Sodium Hypochlorite |
NE
|
NE
|
NE
|
| 10% Sodium Chloride |
NE
|
NE
|
NE
|
| Methyl Ethyl Ketone |
F
|
NE
|
F
|
| Acetone |
F
|
NE
|
F
|
| Toluene |
F
|
NE
|
F
|
| 1,1,1- Trichloroethane |
F
|
NE
|
F
|
| Methanol |
NE
|
NE
|
NE
|
| Isopropanol |
F
|
NE
|
NE
|
| Heptane |
NE
|
NE
|
NE
|
| Mineral Spirits |
NE
|
NE
|
NE
|
| Turpentine |
F
|
NE
|
NE
|
| Diesel Fuel |
NE
|
NE
|
NE
|
| Kerosene |
NE
|
NE
|
NE
|
| Gasoline |
F
|
NE
|
F
|
| ASTM #3 Oil |
NE
|
NE
|
NE
|
| SAE 20 Oil |
NE
|
NE
|
NE
|
| Alconox® |
NE
|
NE
|
NE
|
| Water |
NE
|
NE
|
NE
|
NE = No Effect
F = Failed (affected sample)
7 Day Immersion: Immersed in reagent for 7 days.
Dip Test: Five 10 minute dips in reagent with 30 minute recovery.
Rub Test: Rubbed sample for 1 minute with swab soaked in reagent.
Shelf Life of Unapplied Adhesive:
1 year when stored at 70°F (21°C) and 40% to 50% R.H.
