back to last screen


Technical Data Sheet

BRADY B-605 OVERLAMINATED WIRE MARKER

TDS No. B-605
Effective Date: 21-Feb-2000

Description:
Brady B-605 is 1.0 mil polyvinylfluoride film and an acrylic pressure sensitive adhesive. The tape is overlaminated with a 0.25 mil polyester film to protect printing.

B-605 is used primarily as a pre-printed wiremarker.

B-605 has excellent flexibility and solvent and abrasion resistance. B-605 is available in white with printed legend and solid colors.


Details:


PHYSICAL PROPERTIES
TEST METHODS
AVERAGE RESULTS
Thickness ASTM D 1000
-Substrate
(PVF Film and Overlaminate)
-Adhesive
-Total
0.0024 inch (0.061 mm)

0.0010 inch (0.025 mm)
0.0034 inch (0.086 mm)
Adhesion to:

-Stainless Steel


-Polypropylene		 ASTM D 1000

20 minute dwell
24 hour dwell

20 minute dwell
24 hour dwell
26 oz/in (28 N/100 mm)
33 oz/in (36 N/100 mm)

12 oz/in (13 N/100 mm)
12 oz/in (13 N/100 mm)
Tack ASTM D 2979
Polyken™ Probe Tack
1 second dwell
12.3 oz (350 g)
Tensile Strength and Elongation ASTM D 1000
17 lbs/in (298 N/100 mm), 85%
Application Temperature Lowest application
Temperature to steel
50°F (10°C)

The following testing is performed with pre-printed B-605 wiremarkers and flat samples. Wiremarker samples were wrapped on 0.080" OD wires and flat samples were applied to flat aluminum panels. All samples allowed to dwell 24 hours prior to testing.

PERFORMANCE PROPERTIES
TEST METHODS
TYPICAL RESULTS
High Service Temperature 30 days at 248°F (120°C) No visible effect at 90°C. Slight discoloration but still functional at 120°C
Low Service Temperature 30 days at -40°F (-40°C) No visible effect
Humidity Resistance 30 days at 100°F (37°C), 95% R.H. No visible effect
UV Light Resistance 30 days in UV Sunlighter™ 100 No visible effect
Weatherability ASTM G155, Cycle 1
30 days in Xenon Arc Weatherometer		 No visible effect*
Abrasion Resistance Taber Abraser, CS-10 grinding wheels, 1000 g/arm (Fed. Std. 191A, Method 5306) Polyester overlaminate worn through at 350 cycles.
* Results reported for white tape with black print. Many of the solid color samples fade severely in weatherometer test.

PERFORMANCE PROPERTY
SOLVENT RESISTANCE

Pre-printed wiremarkers were wrapped around 0.080" OD wire and also were laminated to flat aluminum panels. Samples allowed to dwell 24 hours prior to test. Testing consisted of 5 cycles of 10 minute immersions in the specified chemicals followed by 30 minute recovery periods. Testing was conducted at room temperature.

CHEMICAL REAGENT
APPEARANCE OF WIREMARKER
APPEARANCE OF FLAT SAMPLE
Methyl Ethyl Ketone Moderate unwrap Moderate wrinkling of overlaminate at edges.
1,1,1-Trichloroethane Slight unwrap Slight swelling of edges
Isopropyl Alcohol No visible effect No visible effect
JP-8 Jet Fuel Slight unwrap Slight swelling at edges
SAE 20 WT Oil No visible effect No visible effect
Mil 5606 Oil No visible efect No visible effect
Speedi Kut Cutting Oil 332 No visible effect No visible effect
Gasoline Slight adhesive ooze and unwrap Slight adhesive ooze
Rust Veto® 377 No visible effect No visible effect
Skydrol® 500B-4 Slight unwrap Slight swelling at edges
Super Agitene® No visible effect Slight swelling at edges
Alphametals BIOACT® EC-7R™ Slight unwrap Slight swelling at edges
Deionized Water No visible effect No visible effect
3% Alconox® Detergent No visible effect No visible effect

Product testing, customer feedback, and history of similar products, support a customerperformance expectation of at leasttwo years from the date of receipt for this product as long as this product is stored in its original packaging in an environment below 80 degrees F and 60% RH . We are confident that our product will perform well beyond this time frame. However, it remains the responsibility of the user to assess the risk of using such product. We encourage customers to develop functional testing protocols that will qualify a product's fitness for use, in their actual applications.





Trademarks:
Alconox® is a registered trademark of Alconox Co.
BIOACT® is a registered trademark of Petroferm, Inc.
EC-7R™ is a trademark of Petroferm Inc.
Polyken™ is a trademark of Testing Machines Inc.
Rust Veto® is a registered trademark of the E.F. Houghton & Co.
Skydrol® is a registered trademark of the Monsanto Company
Sunlighter™ is a trademark of the Test Lab Apparatus Company
Super Agitene® is a registered trademark of Graymills Corporation
ASTM: American Society for Testing and Materials (U.S.A.)
SAE: Society of Automotive Engineers (U.S.A.)
All S.I. Units (metric) are mathematically derived from the U.S. Conventional
Units.

Note: All values shown are averages and should not be used for specification purposes.
Test data and test results contained in this document are for general information only and shall not be relied upon by Brady customers for designs and specifications, or be relied on as meeting specified performance criteria. Customers desiring to develop specifications or performance criteria for specific product applications should contact Brady for further information.

Product compliance information is based upon information provided by suppliers of the raw materials used by Brady to manufacture this product or based on results of testing using recognized analytical methods performed by a third party, independent laboratory. As such, Brady makes no independent representations or warranties, express or implied, and assumes no liability in connection with the use of this information.


WARRANTY
Brady products are sold with the understanding that the buyers will test them in actual use and determine for themselves their adaptability to their intended uses. Brady warrants to the buyers that its products are free from defects in material and workmanship, but limits its obligation under this warranty to replacement of the product shown to Brady's satisfaction to have been defective at the time Brady sold it. This warranty does not extend to any persons obtaining the product from the buyers. This warranty is in lieu of any other warranty, express or implied, including, but not limited to, any implied warranty of merchantability or fitness for a particular purpose, and of any other obligations or liability on Brady's part. Under no circumstances will Brady be liable for any loss, damage, expense, or consequential damages of any kind arising in connection with the use, or inability to use, Brady's products.

Copyright 2007 Brady Worldwide, Inc. | All Rights Reserved
Material may not be reproduced or distributed in any form without written permission.

Brady North America | 6555 W. Good Hope Rd | Milwaukee, WI 53223 | USA | Tel: 414-358-6600 | Fax: 800-292-2289
Email This Page
Copyright 2008 Brady Worldwide, Inc.