• Print Page

    • Technical Data Sheets

     

    Search Technical Data Sheets



    Technical Data Sheet

    BRADY B-759 PAPER LASERTAB® MARKER

    TDS No. B-759
    Effective Date: 01-Jul-2011

    Description:

    Brady B-759 is an opaque, white laser printable paper with a permanent acrylic adhesive.

    B-759 is a multi-purpose labeling material where applications require a low cost solution, but still require quality graphics and bar codes.

    B-759 provides for excellent toner adhesion and adhesive free processing through the high heat fusing of most laser printers.


    Details:


    PHYSICAL PROPERTIES
    TEST METHODS
    AVERAGE RESULTS
    Thickness ASTM D 1000
    -Substrate
    -Adhesive
    -Total
    0.0030 inch (0.0762 mm)
    0.0006 inch (0.0152 mm)
    0.0036 inch (0.0914 mm)
    Adhesion to:
    -Stainless Steel
    -Polypropylene    		 ASTM D 1000
    20 minute dwell
    Fiber tear upon removal
    from all listed surfaces.
    Tack ASTM D 2979
    Polyken™ Probe Tack
    (1 second dwell, 1 cm/sec separation)
    25 oz (700 g)
    Tensile Strength ASTM D 1000
    -Machine direction
    -Cross direction
    29 lbs/inch (508 N/100 mm)
    21 lbs/inch (368 N/100 mm)
    Application Temperature Lowest application temperature to stainless steel
    25°F (-4°C)
    Performance properties tested on B-759 printed with Hewlett Packard LaserJet 6P printer. Printed samples were laminated to aluminum and allowed to dwell 24 hours before exposure to the indicated environmental conditions.

    PERFORMANCE PROPERTIES
    TEST METHOD
    TYPICAL RESULTS
    Short Term High Service Temperature 15 minutes at 320°F (160°C) No visible effect at 160°C, slight label discoloration at 200°C
    Long Term High Service Temperature 30 days at 193°F (90°C) No visible effect at 90°C, at 110°C label discolors slightly but still functional
    Low Service Temperature 30 days at -94°F (-70°C) No visible effect
    Humidity Resistance 30 days at 100°F (37°C) and 95% R.H. No visible effect
    UV Light Resistance 30 days in UV Sunlighter™ 100 No visible effect
    Abrasion Resistance Taber Abraser, CS-10 grinding wheels, 500 g/arm (Fed. Std. 191A, Method 5306) Print legible to 250 cycles


     

     

    Product testing, customer feedback, and history of similar products, support a customer performance expectation of at least two years from the date of receipt for this product as long as this product is stored in its original packaging in an environment below 80°F (27°C) and 60% RH . We are confident that our product will perform well beyond this time frame. However, it remains the responsibility of the user to assess the risk of using such product. We encourage customers to develop functional testing protocols that will qualify a product's fitness for use in their actual applications.


     





    Trademarks:
    Lasertab® is a registered trademark of Brady Worldwide, Inc.
    Polyken™ is a trademark of Testing Machines Inc.
    Sunlighter™ is a trademark of the Test Lab Apparatus Company
    ASTM: American Society for Testing and Materials (U.S.A.)

    Note: All values shown are averages and should not be used for specification purposes.
    Test data and test results contained in this document are for general information only and shall not be relied upon by Brady customers for designs and specifications, or be relied on as meeting specified performance criteria. Customers desiring to develop specifications or performance criteria for specific product applications should contact Brady for further information.

    Product compliance information is based upon information provided by suppliers of the raw materials used by Brady to manufacture this product or based on results of testing using recognized analytical methods performed by a third party, independent laboratory. As such, Brady makes no independent representations or warranties, express or implied, and assumes no liability in connection with the use of this information.


    WARRANTY
    Brady products are sold with the understanding that the buyers will test them in actual use and determine for themselves their adaptability to their intended uses. Brady warrants to the buyers that its products are free from defects in material and workmanship, but limits its obligation under this warranty to replacement of the product shown to Brady's satisfaction to have been defective at the time Brady sold it. This warranty does not extend to any persons obtaining the product from the buyers. This warranty is in lieu of any other warranty, express or implied, including, but not limited to, any implied warranty of merchantability or fitness for a particular purpose, and of any other obligations or liability on Brady's part. Under no circumstances will Brady be liable for any loss, damage, expense, or consequential damages of any kind arising in connection with the use, or inability to use, Brady's products.

    Copyright 2011 Brady Worldwide, Inc. | All Rights Reserved
    Material may not be reproduced or distributed in any form without written permission.

    Brady North America | 6555 W. Good Hope Rd | Milwaukee, WI 53223 | USA | Tel: 414-358-6600 | Fax: 800-292-2289
     
     

    Brady identifies and protects products, people, and premises with high performance labels, industrial label printers, software, safety & facility identification, spill control, Lockout Tagout solutions and more. Brady helps you create and maintain safer work environments and comply with regulatory standards. Our high-performance materials clearly identify products, components and other assets, even in the most extreme conditions.