| TDS No. B-808 |
Effective Date: 04-Apr-2002
|
Description:
Brady B-808 BradyGlo™ Floor Graphics is a surface printed photoluminescent pressure sensitive polyester with a velvet embossed rigid clear vinyl overlaminate.
|
Details:
Use:Brady B-808 is used to mark aisles, point out safety equipment fire extinguishers and exits, and enforce protective equipment requirements.Special Properties:Overlaminating film exceeds industry safety standards for non-slip surfaces (ASTM D 2047). Meets IMO and DIN 67 510 .Relevant StandardsMeets or exceeds the following standards. ASTM E-2072-00 / ASTM E-2073-00, ASTM E-162, ASTM E-648, ASTM E-662, IMO Resolution A.752(18), ISO/CD 15370, Marine Safety Committee MSC.27(61), DIN 67 510 (Parts 1-4), and PSPA Standard 002 Part 2.Inherent PropertiesBrady B-808 is a non-toxic, non-radioactive, explosion safe (does not generate energy to induce explosions) material allowing for sanitary disposal.Illuminescent Characteristics:Charge time of 5 minutes @ 1000 Lux will charge the sign for +10 hours of glow time. Consistent glow life and unlimited rechargability throughout service life.Adhesive Type:Pressure sensitive acrylicSubstrate Type:Surface printed photoluminescent polyester overlaminated with a velvet embossed rigid clear vinyl overlaminate.Standard Legend Colors:Black, red, green, blueThickness (PSTC-33):Total: 0.017 in. (0.43mm)Adhesive Properties:Adhesion to Stainless Steel (PSTC-1)15 Minute Dwell (Avg.) -- 73 oz/in. (80 N/100mm)Ultimate Dwell (72 Hrs.) (Avg.) -- 87 oz/in. (95 N/100mm)Tack (ASTM D 2979) (Avg.) -- 1149g (11 N)Drop Shear (PSTC-7) (Avg.) -- 35 hoursAbrasion Resistance (Method 5306 of U.S. Federal Test Method Std. No. 191A):H-22 wheels, 1000 g wts.Overlaminate withstands up to 3700 cycles.Gloss (60°):9 Gardner UnitsMinimum Application Temperature:50°F (10°C)Service Temperature:-40°F to 158°F (-40°C to 70°C)Expected Service Life of Adhesive and Printed Legend:Average of 5 yearsOutdoor Applications:Not recommended for outdoor applicationChemical Resistance:REAGENT | 7 DAY IMMERSION | DIP TEST | | 30% Sulfuric Acid | NE | NE | | 10% Sulfuric Acid | NE | NE | | 30% Hydrochloric Acid | NE | NE | | 10% Hydrochloric Acid | NE | NE | | Glacial Acetic Acid | F | NE | | 5% Acetic Acid | NE | NE | | 50% Sodium Hydroxide | NE | NE | | 10% Sodium Hydroxide | F | NE | | 10 % Ammonia | NE | NE | | 5% Sodium Hypochlorite | NE | NE | | Methyl Ethyl Ketone | F | F | | Acetone | F | F | | Toluene | F | F | | 1,1,1-Trichloroethane | F | NE | | Methanol | F | NE | | Isopropyl Alcohol | F | NE | | Heptane | F | NE | | Mineral Spirits | F | NE | | Turpentine | F | NE | | Kerosene | NE | NE | | Diesel Fuel | F | NE | | Gasoline | F | NE | | ASTM #3 Oil | NE | NE | | SAE 20 Oil | NE | NE | | 10% Sodium Chloride | NE | NE | | Alconox® | NE | NE | | Water | NE | NE |
NE = No EffectF = Failed (affected Sample)7 Day Immersion: Immersed in reagent for 7 days.Dip Test: Five 10 minute dips in reagent with 30 minute recovery.Shelf Life of Unapplied Adhesive:1 year when stored at 70°F (21°C) and 40% to 50% R.H.
|
Trademarks:
!
ANSI: American National Standards Institute (U.S.A.)
ASTM: American Society for Testing and Materials (U.S.A.)
Alconox® is a registered trademark of Alconox Co.
BradyGlo™ is a trademark of Brady Worldwide, Inc.
Fed. Spec.: United States Federal Specification (U.S.A.)
IMO: International Maritime Organization
PSTC: Pressure Sensitive Tape Council (U.S.A.)
SAE: Society of Automotive Engineers (U.S.A.)
|
Note: All values shown are averages and should not be used for specification purposes.
Test data and test results contained in this document are for general information only and shall not be relied upon by Brady customers for designs and specifications, or be relied on as meeting specified performance criteria. Customers desiring to develop specifications or performance criteria for specific product applications should contact Brady for further information.
Product compliance information is based upon information provided by suppliers of the raw materials used by Brady to manufacture this product or based on results of testing using recognized analytical methods performed by a third party, independent laboratory. As such, Brady makes no independent representations or warranties, express or implied, and assumes no liability in connection with the use of this information. |
WARRANTY
Brady products are sold with the understanding that the buyers will test them in actual use and determine for themselves their adaptability to their intended uses. Brady warrants to the buyers that its products are free from defects in material and workmanship, but limits its obligation under this warranty to replacement of the product shown to Brady's satisfaction to have been defective at the time Brady sold it. This warranty does not extend to any persons obtaining the product from the buyers. This warranty is in lieu of any other warranty, express or implied, including, but not limited to, any implied warranty of merchantability or fitness for a particular purpose, and of any other obligations or liability on Brady's part. Under no circumstances will Brady be liable for any loss, damage, expense, or consequential damages of any kind arising in connection with the use, or inability to use, Brady's products. |
Copyright 2009 Brady Worldwide, Inc. | All Rights Reserved
Material may not be reproduced or distributed in any form without written permission. |
