Technical Data Sheets

Search Technical Data Sheets


	Technical Data Sheet

BRADY B-819 ANTI SKID-PROOF FLOOR GRAPHICS

TDS No. B-819

Effective Date: 15-Nov-2010

Description:

Brady B-819 is a surface printed vinyl with a velvet embossed rigid clear vinyl overlaminate.

Details:

Use:
Brady B-819 is used to mark aisles, point out safety equipment and exits, and enforce protective equipment requirements.

Special Properties:
Overlaminating film exceeds industry safety standards for non-slip surfaces (ASTM D 2047).

Adhesive Type:
Pressure sensitive acrylic

Substrate Type:
Surface printed vinyl overlaminated with velvet embossed rigid clear vinyl

Standard Material Colors:
White and yellow

Standard Legend Colors:
Black, magenta, orange and red

Thickness (PSTC-33):
Total: 0.012 in. (0.3mm)

Adhesive Properties:
Adhesion to Steel (PSTC-1)
15 Minute Dwell (Avg.) -- 118 oz/in. (129 N/100mm)
Ultimate Dwell (72 Hrs.) (Avg.) -- 237 oz/in. (259 N/100mm)
Tack (ASTM D 2979) (Avg.) -- 1776 g (17 N)
Drop Shear (PSTC-7) (Avg.) -- 22 hr.

Abrasion Resistance (Method 5306 of U.S. Federal Test Method Std. No. 191A):
H-22 wheels, 1000 g wts.
Overlaminate withstands up to 3700 cycles.

Gloss (60°):
7 Gardner Units

Minimum Application Temperature:
0°F (-18°C)

Service Temperature:
-40°F to 158°F (-40°C to 70°C)

Average Outdoor Durability:
Not recommended for outdoor use.

Chemical Resistance:

REAGENT	7 DAY IMMERSION	DIP TEST
30% Sulfuric Acid	NE	NE
10% Sulfuric Acid	NE	NE
30% Hydrochloric Acid	NE	NE
10% Hydrochloric Acid	NE	NE
Glacial Acetic Acid	NE	NE
5% Acetic Acid	NE	NE
50% Sodium Hydroxide	NE	NE
10% Sodium Hydroxide	NE	NE
10% Ammonia	NE	NE
5% Sodium Hypochlorite	NE	NE
Methyl Ethyl Ketone	F	F
Acetone	F	F
Toluene	F	F
1,1,1 - Trichloroethane	F	NE
Methanol	F	NE
Isopropyl Alcohol	F	NE
Heptane	NE	NE
Mineral Spirits	NE	NE
Turpentine	F	NE
Kerosene	NE	NE
Diesel Fuel	NE	NE
Gasoline	F	NE
ASTM #3 Oil	NE	NE
SAE 20 Oil	NE	NE
10% Sodium Chloride	NE	NE
Alconox®	F	NE
Water	NE	NE

NE = No Effect
F = Failed (affected Sample)

7 Day Immersion: Immersed in reagent for 7 days.
Dip Test: Five 10 minute dips in reagent with 30 minute recovery.

Product testing, customer feedback, and history of similar products, support a customer performance expectation of at least two years from the date of receipt for this product as long as this product is stored in its original packaging in an environment below 80°F (27°C) and 60% RH . We are confident that our product will perform well beyond this time frame. However, it remains the responsibility of the user to assess the risk of using such product. We encourage customers to develop functional testing protocols that will qualify a product's fitness for use in their actual applications.

Trademarks:
Alconox® is a registered trademark of Alconox Co.
Signmark® is a registered trademark of Brady Worldwide, Inc.
ASTM: American Society for Testing and Materials (U.S.A.)
PSTC: Pressure Sensitive Tape Council (U.S.A.)
SAE: Society of Automotive Engineers (U.S.A.)
All S.I. Units (metric) are mathematically derived from the U.S. Conventional
Units.

Note: All values shown are averages and should not be used for specification purposes.
Test data and test results contained in this document are for general information only and shall not be relied upon by Brady customers for designs and specifications, or be relied on as meeting specified performance criteria. Customers desiring to develop specifications or performance criteria for specific product applications should contact Brady for further information.

Product compliance information is based upon information provided by suppliers of the raw materials used by Brady to manufacture this product or based on results of testing using recognized analytical methods performed by a third party, independent laboratory. As such, Brady makes no independent representations or warranties, express or implied, and assumes no liability in connection with the use of this information.

WARRANTY
Brady products are sold with the understanding that the buyers will test them in actual use and determine for themselves their adaptability to their intended uses. Brady warrants to the buyers that its products are free from defects in material and workmanship, but limits its obligation under this warranty to replacement of the product shown to Brady's satisfaction to have been defective at the time Brady sold it. This warranty does not extend to any persons obtaining the product from the buyers. This warranty is in lieu of any other warranty, express or implied, including, but not limited to, any implied warranty of merchantability or fitness for a particular purpose, and of any other obligations or liability on Brady's part. Under no circumstances will Brady be liable for any loss, damage, expense, or consequential damages of any kind arising in connection with the use, or inability to use, Brady's products.

Brady North America | 6555 W. Good Hope Rd | Milwaukee, WI 53223 | USA | Tel: 414-358-6600 | Fax: 800-292-2289

Brady identifies and protects products, people, and premises with high performance labels, industrial label printers, software, safety & facility identification, spill control, Lockout Tagout solutions and more. Brady helps you create and maintain safer work environments and comply with regulatory standards. Our high-performance materials clearly identify products, components and other assets, even in the most extreme conditions.

Safe & Secure Online Shopping