Technical Data Sheets

Search Technical Data Sheets


	Technical Data Sheet

BRADY B-861 BradyGlo (TM) High Intensity Aluminum Egress Marker

TDS No. B-861

Effective Date: 09-Sep-2005

Description:

Brady B-861 BradyGlo™ High Intensity Aluminum Egress Markers are glow-in-the-dark (photoluminescent) strips and exit indicators.

Details:

Use:
Brady B-861 BradyGlo™ High Intensity Aluminum Egress Markers are designed for adhesive fastening to rough, as well as smooth surfaces, for low-level exit path markings, steps, and floor perimeter demarcation lines (floor-mounted and wall-mounted).

Relevant Standards:
Complies with all indoor use requirements specified in RS 6-1 and 6-1A of New York Local Law 26 including photoluminescence, washability, flammability, toxic gas generation, and radioactivity.

Approved Model Numbers Accepted For Use, City of New York, Department of Buildings: MEA No. 251-05-M BR: 45-10-6

Inherent Properties:
Brady B-861 is a non-toxic, non-radioactive, explosion safe (does not generate energy to induce explosions) material allowing for safe and effective egress.

Illuminescent Characteristics:
Illumination: 21.6 lux (2 foot-candles) for 2 hours with a 4100K cool white fluorescent lamp.
Luminance (after illumination): 10 minutes 45 mcd/m2
60 minutes 10 mcd/m2
90 minutes 6 mcd/m2

Substrate Type:
Phosphorescent Aluminum

Thickness (PSTC-133):
0.033 in. (0.84 mm)

Abrasion Resistance of Printed Text (Method 5306 of U.S. Federal Method Std. No. 191A):
CS-10 Wheels, 250g wts.
Legend withstands up to 120 cycles
CS-17 Wheels, 1000g wts.
Substrate withstands up to 4000 cycles

Gloss (ASTM D-523):
60° - 121 Gardner Units

Minimum Application Temperature:
Please see manufacturer's recommendation for the adhesive chosen. Per DAP®, the Dynaflex 230® adhesive (an easy to use, widely available product) can be applied at temperatures 40°F and above. Other products may vary.

Service Temperature:
-40°F to 176°F (-40°C to 80°C)

Chemical Resistance:

Chemical	7 Day Immersion	Dip Test	Rub Test
30% Sulfuric Acid	F	NE	NE
10% Sulfuric Acid	F	NE	NE
30% Hydrochloric Acid	NT	NT	NE
10% Hydrochloric Acid	NT	NT	NE
Glacial Acetic Acid	F	NE	NE
5% Acetic Acid	NE	NE	NE
50% Sodium Hydroxide	NT	NT	NE
10% Sodium Hydroxide	NT	NT	NE
10% Ammonia	NE	NE	NE
5% Sodium Hypochlorite	NE	NE	NE
10% Sodium Chloride	NE	NE	NE
MEK	F	NE	NE
Acetone	F	NE	NE
Toluene	F	NE	NE
Methanol	NE	NE	NE
Isopropyl Alcohol	NE	NE	NE
Heptane	F	NE	NE
Mineral Spirits	NE	NE	NE
Turpentine	NE	NE	NE
Diesel Fuel	F	NE	NE
Kerosene	NE	NE	NE
Gasoline	F	NE	NE
ASTM #3 Oil	NE	NE	NE
SAE 20 Oil	NE	NE	NE
Alconox®	F	NE	NE
Water	NE	NE	NE
Formula 409 Cleaner®	NE	NE	NE

F = Fail

NE = No Effect

NT = Not Tested

Dip Test: Five 10 minute dips in reagent with 30 minute recovery.

Shelf Life
6 years when stored at 70°F (21°C) and 40% to 50% RH.

Trademarks:
Alconox® is a registered trademark of Alconox Co.
Signmark® is a registered trademark of Brady Worldwide, Inc.
DAP® is a registered trademark of DAP, Inc.
Dynaflex® is a registered trademark of DAP, Inc.
ASTM: American Society for Testing and Materials (U.S.A.)
Fed. Spec.: United States Federal Specification (U.S.A.)
PSTC: Pressure Sensitive Tape Council (U.S.A.)
BradyGloTM is a trademark of Brady Worldwide, Inc.

Note: All values shown are averages and should not be used for specification purposes.
Test data and test results contained in this document are for general information only and shall not be relied upon by Brady customers for designs and specifications, or be relied on as meeting specified performance criteria. Customers desiring to develop specifications or performance criteria for specific product applications should contact Brady for further information.

Product compliance information is based upon information provided by suppliers of the raw materials used by Brady to manufacture this product or based on results of testing using recognized analytical methods performed by a third party, independent laboratory. As such, Brady makes no independent representations or warranties, express or implied, and assumes no liability in connection with the use of this information.

WARRANTY
Brady products are sold with the understanding that the buyers will test them in actual use and determine for themselves their adaptability to their intended uses. Brady warrants to the buyers that its products are free from defects in material and workmanship, but limits its obligation under this warranty to replacement of the product shown to Brady's satisfaction to have been defective at the time Brady sold it. This warranty does not extend to any persons obtaining the product from the buyers. This warranty is in lieu of any other warranty, express or implied, including, but not limited to, any implied warranty of merchantability or fitness for a particular purpose, and of any other obligations or liability on Brady's part. Under no circumstances will Brady be liable for any loss, damage, expense, or consequential damages of any kind arising in connection with the use, or inability to use, Brady's products.

Brady North America | 6555 W. Good Hope Rd | Milwaukee, WI 53223 | USA | Tel: 414-358-6600 | Fax: 800-292-2289

Brady identifies and protects products, people, and premises with high performance labels, industrial label printers, software, safety & facility identification, spill control, Lockout Tagout solutions and more. Brady helps you create and maintain safer work environments and comply with regulatory standards. Our high-performance materials clearly identify products, components and other assets, even in the most extreme conditions.

Safe & Secure Online Shopping