Technical Data Sheets

Search Technical Data Sheets


	Technical Data Sheet

B-972 COMMERCIAL GRADE SELF STICKING VINYL

TDS No. B-972

Effective Date: 25-Apr-2007

Description:

Brady B-972 is a commercial grade, flexible, vinyl film with a pressure sensitive adhesive.

Details:

Use:
Safety Sign material designed for commercial or light industrial applications.

Special Properties:
Can be applied at 0°F (-18°C)

Adhesive Type:
Pressure sensitive acrylic

Substrate Type:
Vinyl Film

Standard Material Colors:
White

Standard Legend Colors:
Black, red, blue, green and yellow

Thickness (PSTC-33):
Total: 0.005 in (0.125 mm)

Adhesive Properties:
Adhesion to Steel (PSTC-1)
15 Minute Dwell (Avg.) -- 112 oz/in (122.5N/100mm)
Ultimate Dwell (72 Hrs.) (Avg.) -- 137 oz/in (149.9N/100mm)
Tack (ASTM D 2979) (Avg.) -- 1000 g
Drop Shear (PSTC-7) (Avg.) -- 3 hours

Abrasion Resistance (Method 5306 of U.S. Federal Test Method Std. No. 191A):
CS-10 wheels and 1000 g weights,
Legend withstood up to 321 cycles.
CS-10 wheels and 1000 g weights,
Substrate withstood up to 538 cycles.

Gloss (60°):

7.5 Gardner Units

Minimum Application Temperature:
0°F (-18°C)

Service Temperature:
122°F to 176°F (50°C to 80°C)

Average Outdoor Durability:
1-2 years (Average expected outdoor life of product will depend on user definition of failure and climatic conditions.)

Chemical Resistance:

REAGENT	7 DAY IMMERSION	DIP TEST	RUB TEST
30% Sulfuric Acid	NE	NE	NE
10% Sulfuric Acid	NE	NE	NE
30% HCI	NE	NE	NE
10% HCI	NE	NE	NE
50% NaOH	NE	NE	NE
10% NaOH	NE	NE	NE
Methyl Ethyl Ketone	F	F	NE
Acetone	F	F	NE
Methanol	NE	NE	NE
IPA (Isopropanol)	F	NE	NE
ASTM #3 Oil	NE	NE	NE
SAE 20 Oil	NE	NE	NE
Alconox®	F	NE	NE
Toluene	F	F	NE
Mineral Spirits	NE	NE	NE
Glacial Acetic Acid	F	F	NE
5% Acetic Acid	NE	NE	NE
Diesel Fuel	F	NE	NE
5% Sodium Hypochlorite	NE	NE	NE
10% Sodium Chloride	NE	NE	NE
Heptane	F	NE	NE
10% Ammonia	NE	NE	NE
Turpentine	F	NE	NE
Kerosene	NE	NE	NE
Water	NE	NE	NE
Formula 409® Cleaner	NE	NE	NE
Gasoline	F	F	NE

NE = No Effect
NT = Not Tested
F = Failed (affected Sample)

7 Day Immersion: Immersed in reagent for 7 days.
Dip Test: Five 10 minute dips in reagent with 30 minute recovery.
Rub Test: Rubbed sample for 1 minute with swab soaked in reagent.

Shelf Life:
1 years when stored at 70°F (21°C) and 40% to 50% R.H.

Trademarks:
ASTM: American Society for Testing and Materials (U.S.A.)
Alconox® is a registered trademark of Alconox Co.
Formula 409® is a registered trademark of the Chlorox Company
PSTC: Pressure Sensitive Tape Council (U.S.A.)
SAE: Society of Automotive Engineers (U.S.A.)

Note: All values shown are averages and should not be used for specification purposes.
Test data and test results contained in this document are for general information only and shall not be relied upon by Brady customers for designs and specifications, or be relied on as meeting specified performance criteria. Customers desiring to develop specifications or performance criteria for specific product applications should contact Brady for further information.

Product compliance information is based upon information provided by suppliers of the raw materials used by Brady to manufacture this product or based on results of testing using recognized analytical methods performed by a third party, independent laboratory. As such, Brady makes no independent representations or warranties, express or implied, and assumes no liability in connection with the use of this information.

WARRANTY
Brady products are sold with the understanding that the buyers will test them in actual use and determine for themselves their adaptability to their intended uses. Brady warrants to the buyers that its products are free from defects in material and workmanship, but limits its obligation under this warranty to replacement of the product shown to Brady's satisfaction to have been defective at the time Brady sold it. This warranty does not extend to any persons obtaining the product from the buyers. This warranty is in lieu of any other warranty, express or implied, including, but not limited to, any implied warranty of merchantability or fitness for a particular purpose, and of any other obligations or liability on Brady's part. Under no circumstances will Brady be liable for any loss, damage, expense, or consequential damages of any kind arising in connection with the use, or inability to use, Brady's products.

Brady North America | 6555 W. Good Hope Rd | Milwaukee, WI 53223 | USA | Tel: 414-358-6600 | Fax: 800-292-2289

Brady identifies and protects products, people, and premises with high performance labels, industrial label printers, software, safety & facility identification, spill control, Lockout Tagout solutions and more. Brady helps you create and maintain safer work environments and comply with regulatory standards. Our high-performance materials clearly identify products, components and other assets, even in the most extreme conditions.

Safe & Secure Online Shopping