• Print Page

    • Technical Data Sheets

     

    Search Technical Data Sheets



    Technical Data Sheet

    BRADY BA-5063 SUPPORTED TRANSFER TAPE. 0.5 MIL PET, COATED BOTH SIDES WITH 1 MIL COLD TEMPERATURE ADHESIVE. LINER MOUNTED.

    TDS No. BA-5063
    Effective Date: 07-Mar-2008

    Description:

    BRADY GENERAL

    Material Type:  2 side coated, supported transfer tape

    Adhesive:  Permanent acrylic

     

    APPLICATIONS

    Cold temperature applications

     

    Brady BA5063 is RoHS compliant to 2005/618/EC MCV amendment to RoHS Directive 2002/95/EC.

     



    Details:

    PHYSICAL PROPERTIES

    TEST METHODS

    AVERAGE RESULTS

    Thickness

    ASTM D 1000
    -Substrate
    -Adhesive (coated 2 sides)
    -Total (without liners)

     

    0.0005 inch (0.0127 mm)
    0.0020 inch (0.0508 mm)
    0.0025 inch (0.0635 mm)

    Adhesion to:
    -Stainless Steel

    -Results typical for faceside & backside

    ASTM D 1000

    20 minute RT (Room Temperature) dwell

     

     

    36 oz/in (39.4 N/100 mm)

    Tack

    -Results typical for faceside & backside

     

    ASTM D 2979 Polyken™ Probe Tack
    1 second dwell, 1cm/sec probe speed

    RT (Room Temperature)

     

    1000 g

    Shear Adhesion Failure, °C

    -Results typical for faceside & backside

     

    ASTM D4498-95

    (25mm x 25mm x 1kg)

    20 minute RT (Room Temperature) dwell

     

     144°F (62°C) 

     

     

    Product testing, customer feedback, and history of similar products, support a customerperformance expectation of at least two years from the date of receipt for this product as long as this product is stored in its original packaging in an environment below 80 degrees F (27° C) and 60% RH . We are confident that our product will perform well beyond this time frame. However, it remains the responsibility of the user to assess the risk of using such product. We encourage customers to develop functional testing protocols that will qualify a product's fitness for use, in their actual applications.





    Trademarks:
    ASTM: American Society for Testing and Materials (U.S.A.)
    Polyken™ is a trademark of Testing Machines Inc.

    Note: All values shown are averages and should not be used for specification purposes.
    Test data and test results contained in this document are for general information only and shall not be relied upon by Brady customers for designs and specifications, or be relied on as meeting specified performance criteria. Customers desiring to develop specifications or performance criteria for specific product applications should contact Brady for further information.

    Product compliance information is based upon information provided by suppliers of the raw materials used by Brady to manufacture this product or based on results of testing using recognized analytical methods performed by a third party, independent laboratory. As such, Brady makes no independent representations or warranties, express or implied, and assumes no liability in connection with the use of this information.


    WARRANTY
    Brady products are sold with the understanding that the buyers will test them in actual use and determine for themselves their adaptability to their intended uses. Brady warrants to the buyers that its products are free from defects in material and workmanship, but limits its obligation under this warranty to replacement of the product shown to Brady's satisfaction to have been defective at the time Brady sold it. This warranty does not extend to any persons obtaining the product from the buyers. This warranty is in lieu of any other warranty, express or implied, including, but not limited to, any implied warranty of merchantability or fitness for a particular purpose, and of any other obligations or liability on Brady's part. Under no circumstances will Brady be liable for any loss, damage, expense, or consequential damages of any kind arising in connection with the use, or inability to use, Brady's products.

    Copyright 2011 Brady Worldwide, Inc. | All Rights Reserved
    Material may not be reproduced or distributed in any form without written permission.

    Brady North America | 6555 W. Good Hope Rd | Milwaukee, WI 53223 | USA | Tel: 414-358-6600 | Fax: 800-292-2289
     
     

    Brady identifies and protects products, people, and premises with high performance labels, industrial label printers, software, safety & facility identification, spill control, Lockout Tagout solutions and more. Brady helps you create and maintain safer work environments and comply with regulatory standards. Our high-performance materials clearly identify products, components and other assets, even in the most extreme conditions.