Wraptor Upgrade Version 1.30a Utilities - Part 3 FMU

The "Part 3: FMU" of the Brady Wraptor" Printer Applicator Upgrade Version 1.30a Utilties is available for download in ZIP format.

Upgrade utilities include four part which must be installed in order: 1) USB Driver, 2) Printer Driver, 3) FMU (included in this download) and 4) Firmware Upgrade.

NOTE: You must use a PC with an internet connection to complete the Wraptor OS upgrade. If you prefer to upgrade your Wraptor to version 1.30a via CD, call Brady Tech Support at 1-800-643-8766.

Part
3 - File Management Utility (FMU) (Optional)

1. Download the zip file "FMU_v1-30.zip"
by clicking on the link below. Save this file to a known location.

2. Navigate to the location where you just saved this file, and double click
on the "FMU_v1-30.zip" zip archive.

3. Extract the contents of the zip archive to a known location.

4. Navigate to this location and double click "setup.exe"

5. Select a language to proceed.

6. If the installer asks you if you would like to upgrade the FMU, click Yes.

7. Click Next.

8. The FMU will now install/upgrade. When this is complete, click Finish.

If you should have any questions
about this upgrade process, please contact Tech Support at 1-800-643-8766.