Wraptor Upgrade Version 1.30a Utilities - Part 4 Firmware Upgrade

The "Part 4 - Firmware Upgrade of the Brady Wraptor Printer Applicator Upgrade
Version 1.30a Utilities" is available for download in ZIP format.

Upgrade utilities include four parts which must be installed in order: USB
Driver, Printer Driver, FMU and Firmware Upgrade (available in this download).

NOTE: You must use a PC with an internet connection to complete
the Wraptor OS upgrade. If you prefer to upgrade your Wraptor to version 1.30a
via CD, call Brady Tech Support at 1-800-643-8766.

Part 4 - Wraptor Firmware Upgrade

1. Verify that the Wraptor is turned on and connected to your PC, and that
the connection type selected in the Wraptor is the type that will be used in
the following upgrade process.

2. Download the zip file "Wraptor_Upgrade_v1-30.ZIP" by clicking on the link
below. Save this file to a known location.

3. Navigate to the location where you just saved this file, and double click
on the "Wraptor_Upgrade_v1-30.ZIP" zip archive.

4. Extract the contents of the zip archive to a known location.

5. Navigate to this location. IF you are using Windows NT, double click "wraptor
upgrade NT.exe" otherwise double click "wraptor upgrade.exe".

6. Select the port the Wraptor is currently using to connect to your PC and
click OK.

7. The following steps in this section must be performed on the Wraptor. Click
on the File Tab and select Exit.

8. Select Upgrade System.

9. Verify that the version displayed is correct and click OK.

10. The Wraptor will now update and back up the registry. This will take a
few minutes.

11. After the upgrade is complete, the Wraptor will instruct you to reboot.
Turn off power to the Wraptor for a minimum of 30 seconds, and then turn the
power back on.

12. The should now say that it is updating files, and will then ask you to
reboot once more.

13. Cycle the power as in step 11. Once the Wraptor restarts, it should boot
up to the File screen and be ready to perform. Your Wraptor system is now updated
to v1.30a.

14. Restart your PC to ensure that all of these changes have taken effect.