Wraptor Upgrade Version 1.30a Utilities - Part 1 USB Driver

The "Part 1-USB Driver" of the Brady Wraptor" Printer Applicator Upgrade Version 1.30a Utilties is available for download in ZIP format.

Upgrade utilities include four parts which must be installed in order: Part 1: USB Driver (included in this download), Part 2: Printer Driver, Part 3: FMU and Part 4 Firmware Upgrade.

NOTE: You must use a PC with an internet connection to complete the Wraptor OS upgrade. If you prefer to upgrade your Wraptor to version 1.30a via CD, call Brady Tech Support at 1-800-643-8766.

Part 1 - Updating USB Drivers
1. The following upgrade files are available in ZIP format. If you do not have the program "WinZip", you will not be able to complete any part of the following upgrade process. Download WinZip for free at www.winzip.com.
2. Once you have finished downloading and installing WinZip, you may proceed through all parts of the upgrade process detailed on this page.
3. Download the zip file "Wraptor_v1-30_USBDrv.zip" by clicking on the link below. Save this file to a known location.
4. Navigate to the location where you just saved this file, and double click the "Wraptor_v1-30_USBDrv.zip" zip archive.
5. Extract the contents of the zip archive to a known location.
6. Navigate to this location and double click on the "Upgrade USB Driver Instructions" for further instructions.