Wraptor Upgrade Version 1.30a Utilities - Part 3 FMU
9/5/0633.11 MB, ZIP
The "Part 3: FMU" of the Brady Wraptor" Printer Applicator Upgrade Version 1.30a Utilties is available for download in ZIP format.
Upgrade utilities include four part which must be installed in order: 1) USB Driver, 2) Printer Driver, 3) FMU (included in this download) and 4) Firmware Upgrade.
NOTE: You must use a PC with an internet connection to complete the Wraptor OS upgrade. If you prefer to upgrade your Wraptor to version 1.30a via CD, call Brady Tech Support at 1-800-643-8766.
Part
3 - File Management Utility (FMU) (Optional)
1. Download the zip file "FMU_v1-30.zip"
by clicking on the link below. Save this file to a known location.
2. Navigate to the location where you just saved this file, and double click
on the "FMU_v1-30.zip" zip archive.
3. Extract the contents of the zip archive to a known location.
4. Navigate to this location and double click "setup.exe"
5. Select a language to proceed.
6. If the installer asks you if you would like to upgrade the FMU, click Yes.
7. Click Next.
8. The FMU will now install/upgrade. When this is complete, click Finish.
If you should have any questions
about this upgrade process, please contact Tech Support at 1-800-643-8766.
You must have WinZip® software to view this document. You can download WinZip for free at www.winzip.com.
