Blank Pipe Marker with Arrow

Name: Blank Pipe Marker with Arrow
Brand: Brady®
SKU: 42307
Price: 12.29 USD
Availability: InStock

$12.29 (USD) / each

Overview Specifications Support Recommendations

Two close-up photos showing someone applying a red Brady snap-on pipe marker reading "Fire Protection Water" to a pipe.

A pipe with a green Brady snap-on pipe marker reading "Hot Water" applied to it.

Product Highlights

Color:

White on Blue
Material:

Plastic
Material Number:

B-915 (View Technical Data Sheet)
Overall Size:

1.125 - 2.375"
Pipe Marker Mounting Style:

Snap-On

Blank Pipe Marker with Arrow Add To Compare In Compare

$12.29 (USD) / each

Part Number:

42307

Overview

This B-915 pipe marker is designed for use on rusty, dirty, wet, or rough pipes, where pressure sensitive labels cannot be used.

Pipe Marking Guide

Brady pipe marker products meet a wide variety of applications to help you comply with ANSI/ASME A13.1

	B-946 Self-Sticking Marker	B-736 Self-Sticking Markers-To-Go	B-300 Plenum Rated Duct and Pipe Markers	B-915 Snap-On Marker	B-915 Strap-On Marker	B-689 Wrap-Around Marker	B-681 High-Performance, High-Visibility Marker	B-983 LiftMark Pipe Marker Carrier™ Standoff Kits
Marker Type	Premium self-adhesive marker for indoor or outdoor use in either individual markers or roll-form.	Economical self-adhesive roll-form markers for smooth, clean, dry pipe surfaces.	Premium self-adhesive individual marker and detachable arrow for use on HVAC plenums and ducts.	Non-adhesive coiled pipe marker “snaps” around pipe giving 360-degree visibility while remaining easily removable	Non-adhesive vinyl marker applied with nylon strapping (included).	Wrap-around marker with an adhesive edge to secure marker. Repeating legend offers 360-degree visibility.	Polyester marker applied to a fiberglass carrier. Markers fasten to pipe with included mounting clips and strapping (sold separately).	Patented design lifts marker off pipe surface. Simply use nylon ties (sold separately) to attach standoffs to pipe and snap carrier in place.
Marker Material	Vinyl	Plastic film	Soft aluminum	Vinyl	Vinyl	Polyester	Fiberglass/plastic carrier with Polyester label	Plastic standoff & PVC or fiberglass carrier
Installation Type	Adhesive	Adhesive	Adhesive	Snap-on	Nylon strapping	Wrap-around with adhesive edge	Mounting clips (included) & strapping (sold separately)	Strapping (sold separately
Outer Diameter	From less than 0.75" to greater than 8"	---	2" to 8" or larger	0.75" to 6"	6" to 15"	0.2" to 7.875"	8" or larger	Three sizes supporting 2", 4" and 8" or larger
Service Temperature	-40°F to 180°F (-40°C to 82°C)	-40°F to 212°F (-40°C to 100°C)	-40°F to 180°F (-40°C to 82°C)	-40°F to 180°F (-40°C to 82°C)	-40°F to 180°F (-40°C to 82°C)	-40°F to 248°F (-40°C to 120°C)	-40°F to 230°F (-40°C to 110°C)	-40°F to 248°F (-40°C to 120°C)
Outdoor Durability	3 to 5 years	2 to 3 years	---	5 to 8 years	5 to 8 years	5 to 8 years	5 to 8 years	---

See our complete Pipe Marking Guide for additional material specifications such as chemical resistance, temperature and special properties.

Pipe Color Code Chart - ANSI/ASME A13.1

Label Color	Text Color	Example	Pipe Contents
Red	White	Red	Firefighting
Orange	Black	Orange	Toxic or corrosive
Yellow	Black	Yellow	Flammable, combustible or oxidizing
Gray	Black	Gray	Steam; or steam condensate, boiler feedwater, or other hot water
Green	White	Green	Potable, cooling, or other cold or tepid water
Blue	White	Blue	Compressed air
Purple	White	Purple	To be defined by the user
White	Black	White	To be defined by the user
Brown	White	Brown	To be defined by the user
Black	White	Black	To be defined by the user

Pipe Marker Visibility and Size Requirements

Outside Diameter of Pipe or Covering	Length of Color Field	Letter Height
0.7 in-1.3 in (18-33 mm)	8 in (203 mm)	0.5 in (13 mm)
1.4 in-2.4 in (34-61 mm)	8 in (203 mm)	0.7 in (19 mm)
2.5 in-6.7 in (62-170 mm)	12 in (305 mm)	1.3 in (32 mm)
6.8 in-10 in (171-254 mm)	24 in (610 mm)	2.5 in (64 mm)
Over 10 in (Over 254 mm)	32 in (813 mm)	3.5 in (89 mm)

What if your pipe or covering outside diameter is less than 0.7 inch or 18 mm?

In cases where it is difficult to label a pipe or covering due to size, we advise using durable and long-lasting energy source or valve tags in place of pipe labels or markers.

Specifications

Key Characteristics


Key Characteristics	Product Number	42307
	UPC	754473423070
	UOM	Each
	Quantity per Card or Sheet	1
	Cards or Sheets per Pack	1
	Trade Name	BradySnap-On™
	Brand Name	Brady®

Dimensions


Dimensions	Dimensions	0.875 in H x 16 in W
	Height	0.875 in
	Width	16 in
	Pipe Marker Style	B2L

Material Characteristics


Material Characteristics	Material Number	B-915 (View Technical Data Sheet)
	Material	Plastic
	Average Outdoor Durability	5 to 8 Years
	Color	White on Blue
	Background Color	Blue
	Legend Text Color	White
	Resistance Properties	Abrasion-resistant, Chemical-resistant
	Indoor or Outdoor Use	Outdoor Use
	Service Temperature Range °F	-40 °F - 140 °F

Product Features


Product Features	Application	Pipe and Valve Marking
	Class	General Purpose
	Pipe Marker Mounting Style	Snap-On

Compatibility


Compatibility	Overall Size	1.125 - 2.375"
	Maximum Outside Pipe Diameter	2.375 in
	Minimum Outside Pipe Diameter	1.125 in

Preprinted Information


Preprinted Information	Pre-Printed Areas on Label	Arrows
	Arrow Direction	Directional
	Character Height	0.75 in

Compliance


Compliance	California Prop 65	No warning label required
	REACH SVHC Status	Part does not contain an SVHC
	REACH Candidate List Date	23 January 2024
	Country of Origin	United States of America
	ECCN (Export Commodity Control Number)	EAR99
	HTS Code (Harmonized Tariff Schedule)	4911.99.8000
	RoHS Compliance Status	Not applicable to this product
	UNSPSC	55121737