LED Line Projector - How To Install
LED Line Projector - How To Install
Mark the unmarkable with the LED Line Projector from Brady. Identify areas where paint and tape can't.
- Language
- English
- Length
- 1:32
Video Transcript
[00:00:03] - Before you install your Brady LED line projector, there are some important things you need to consider when selecting a mounting location.
[00:00:11] - Choose an area with reasonable airflow, that's clear of flammable materials, and has access to a standard power source.
[00:00:18] - It's best to mount the projector centered above the projector line.
[00:00:22] - Be sure the mounting structure can hold about ten times the weight of the projector.
[00:00:27] - Next, consider your mounting height and lens angle.
[00:00:30] - These are the two biggest impacts on the appearance of your projected lines.
[00:00:34] - In general, the higher the projector is from the floor, the longer the line.
[00:00:38] - The wider the lens angle, the longer the line.
[00:00:42] - The shorter the line, the brighter it will be.
[00:00:45] - For additional guidance, reach out to Brady Support or your local sales rep.
[00:00:51] - Begin by attaching the yoke to the fixture using the provided hardware.
[00:01:01] - Then, mount the fixture into position using your preferred method.
[00:01:05] - Always install a safety cable, anchoring the projector to the mounting structure.
[00:01:10] - Plug the projector in and set the position of your line.
[00:01:15] - If the blinder panels are needed, attach them to the holes on the side of the lens using the provided hardware.
[00:01:21] - Bend the panels to adjust the length of the line.
[00:00:11] - Choose an area with reasonable airflow, that's clear of flammable materials, and has access to a standard power source.
[00:00:18] - It's best to mount the projector centered above the projector line.
[00:00:22] - Be sure the mounting structure can hold about ten times the weight of the projector.
[00:00:27] - Next, consider your mounting height and lens angle.
[00:00:30] - These are the two biggest impacts on the appearance of your projected lines.
[00:00:34] - In general, the higher the projector is from the floor, the longer the line.
[00:00:38] - The wider the lens angle, the longer the line.
[00:00:42] - The shorter the line, the brighter it will be.
[00:00:45] - For additional guidance, reach out to Brady Support or your local sales rep.
[00:00:51] - Begin by attaching the yoke to the fixture using the provided hardware.
[00:01:01] - Then, mount the fixture into position using your preferred method.
[00:01:05] - Always install a safety cable, anchoring the projector to the mounting structure.
[00:01:10] - Plug the projector in and set the position of your line.
[00:01:15] - If the blinder panels are needed, attach them to the holes on the side of the lens using the provided hardware.
[00:01:21] - Bend the panels to adjust the length of the line.